How to Set Up an eSIM on Samsung Galaxy: 2026 Travel Guide

eSIM Guides · · 8 min read · By AirCarta Team

How to Set Up an eSIM on Samsung Galaxy: 2026 Travel Guide

Knowing how to set up an eSIM on Samsung Galaxy phones saves you a SIM counter queue, a lost nano-SIM and a surprise roaming bill. The whole install takes about two minutes in SIM manager, and you can do it at home before you fly.

The steps themselves are short. What catches travelers out is that Samsung renamed a few menus between One UI versions, and that one switch, Data roaming, has to be on for the travel line even though it sounds like the thing you are trying to avoid. This guide covers both.

⚡ Quick Answer

To set up an eSIM on a Samsung Galaxy, go to Settings → Connections → SIM manager → Add eSIM (or "Add mobile plan"), tap Scan QR code, and scan the code from your eSIM provider. Then turn on Data roaming for that line when you land and choose it as your mobile data SIM.

With AirCarta, the QR code arrives by email seconds after purchase, and you can install it before you leave: the plan only starts when your phone connects at your destination. Pick a destination such as Japan eSIM plans and follow the steps below.

✅ Before You Start: Three Quick Checks

Your Galaxy needs an eSIM chip, an unlocked carrier status, and a Wi-Fi connection before you install.

  • eSIM support: Samsung lists eSIM ("hybrid eSIM", one physical SIM plus an eSIM) across the Galaxy S20 series and later, the Galaxy Z Fold and Z Flip lines, and a number of Galaxy A models. Support can vary by country and model number, so check yours with our eSIM compatibility checker.
  • Find your EID: a phone with an eSIM chip shows an EID (a 32-digit eSIM identifier). Samsung puts it under Settings → About phone → Status, and dialling *#06# usually shows it too. More on this in what an EID number is.
  • Unlocked phone: a Galaxy bought on contract may be locked to your home carrier and will refuse a foreign eSIM profile. Ask your carrier if you're unsure.
  • Wi-Fi: the eSIM profile downloads over the internet, so install it at home or in your hotel, not on a patchy airport connection.
  • 📱 Step by Step: Adding the eSIM in SIM Manager

    Adding a travel eSIM takes five taps from the Settings app.

    Close-up of a hand holding a Samsung smartphone with the screen visible
  • Open Settings → Connections → SIM manager. On some older One UI versions this is called SIM card manager.
  • Tap Add eSIM. On older versions the button reads Add mobile plan.
  • Tap Scan QR code (older wording: Add using QR code).
  • Scan the QR code from your eSIM email. Open the email on a laptop or tablet, because you can't scan a code shown on the same phone.
  • Confirm and wait a few seconds while the profile downloads. Samsung's US support page also recommends restarting the phone to apply the new eSIM profile.
  • Give the new line a clear name such as Travel Data when Samsung offers you the option (you can rename it later by tapping the line in SIM manager). With two lines on the phone, every data and call menu asks you to choose, and "eSIM 1" tells you nothing.

    If the QR code won't scan

    Use the manual route instead: in SIM manager, tap Add eSIM, then the option to enter an activation code (older wording: Add using activation code), and type in the SM-DP+ address and activation code from your email. This gets around screen glare, a blurry printout or a dirty camera lens.

    These menu names come from Samsung's own guides in the UK and the US. Exact wording can differ slightly by region, carrier and One UI version.

    🛰️ The Two Settings That Make It Work Abroad

    Most "eSIM installed but no internet" problems come down to two settings: Data roaming and the mobile data SIM.

    Setting Where to find it Set it to
    Data roaming Settings → Connections → Mobile networks ON for the travel eSIM once you land
    Mobile data SIM Settings → Connections → SIM manager (under the preferred or primary SIM options) Your travel eSIM
    Calls and texts SIM Settings → Connections → SIM manager Your home SIM, if you want to keep your number for 2FA codes

    Why roaming has to be on: a travel eSIM is a foreign profile connecting to a local network, which is technically roaming. The plan is prepaid, so turning roaming on for the travel line doesn't add charges to it.

    Watch your home line: Samsung applies some settings per SIM and some to the whole phone, depending on your model. If you don't want your home carrier's roaming charges, make sure mobile data is set to the travel eSIM, and check your home carrier's roaming rules before you fly. Turning Auto data switching off in SIM manager also stops the phone from quietly falling back to your home line when the eSIM signal drops.

    ⏱️ When Should You Install It?

    Install your travel eSIM a few days before you fly, while you're on home Wi-Fi.

    With AirCarta, installing doesn't start the clock: the plan starts when your phone first connects to a network at your destination. That means you can set everything up calmly at home, leave the line switched off in SIM manager, and turn it on after landing. Our guide on how to activate an eSIM in 3 steps explains activation timing in more detail.

    Traveler holding a smartphone and a boarding pass in an airport terminal
    When What to do on your Galaxy
    At home, before the tripCheck eSIM support, buy the plan, scan the QR code on Wi-Fi, name the line, then switch it off
    On the planeNothing. Keep the travel line off until you land
    After landingSwitch the travel line on, turn on Data roaming, set it as the mobile data SIM
    During the tripTop up from the app if you run low
    Back homeSwitch mobile data back to your home SIM, then remove the travel eSIM when the plan has ended

    🛠️ Troubleshooting Common Samsung eSIM Problems

    Most Galaxy eSIM issues are fixed by checking settings in the right order.

  • No data after landing: check the travel line is switched on, Data roaming is on, and it is selected as the mobile data SIM. Then toggle Airplane mode on and off.
  • "Add eSIM" is missing: your model or region may not support eSIM, or the phone may be locked to a carrier. Check the compatibility list.
  • QR code says it's already used: most eSIM QR codes can only be installed once. Don't delete an installed travel eSIM to "reset" it. Contact support instead.
  • Network shows but pages won't load: restart the phone, then in Mobile networks set Network operators to select automatically.
  • Slow speeds: your phone may be on a congested cell. Try switching between 5G/4G modes in Mobile networks → Network mode.
  • Step-by-step screenshots for Android and iPhone are on our eSIM installation guide. Using an iPhone too? See how to set up an eSIM on iPhone.

    👨‍👩‍👧 Setting Up eSIMs for the Whole Family

    If everyone in the family has a phone, each person needs their own eSIM and their own QR code.

    AirCarta's Family pack lets you buy 2 to 6 eSIMs in one checkout, choose a different plan for each traveler, and each person gets their own eSIM by email, so everyone can install it on their own Galaxy or iPhone. From 3 eSIMs, you get 10% off. If plans change and one eSIM is never installed, you can get a full refund in one tap in the app within 30 days of purchase.

    Stuck mid-setup? AirCarta's human support team is on WhatsApp in English, French, Spanish, Arabic and Darija.

    ❓ Frequently Asked Questions

    How do I add an eSIM to my Samsung phone?

    Go to Settings → Connections → SIM manager → Add eSIM, tap Scan QR code and scan the code from your provider. On older One UI versions the buttons read "Add mobile plan" and "Add using QR code".

    Which Samsung phones support eSIM?

    Samsung lists eSIM on the Galaxy S20 series and later, the Galaxy Z Fold and Z Flip lines, and several Galaxy A models. Support can depend on the country and model number, so check your exact phone before buying.

    Do I need to turn on data roaming for an eSIM on Samsung?

    Yes. A travel eSIM connects to local networks as roaming, so Data roaming must be on for it to get internet abroad. Keep mobile data set to the travel eSIM so your home line isn't used.

    Can I keep my physical SIM and use an eSIM at the same time on Samsung?

    Yes. eSIM-capable Galaxy phones support a physical SIM and an eSIM together, so you can keep your home number for calls and texts while using the eSIM for data.

    What is the best eSIM for a Samsung Galaxy when traveling?

    Any data eSIM for your destination works if your Galaxy is eSIM-compatible and unlocked. AirCarta covers 190+ destinations, emails the QR code instantly, and the plan starts only when you arrive.

    Can I install the eSIM before my trip?

    Yes. Install it at home on Wi-Fi and leave the line off. With AirCarta, the plan starts when your phone connects at your destination, not when you install it.

    Can I reuse a travel eSIM QR code on another phone?

    Usually not. Most eSIM QR codes can be installed only once, so don't delete the profile until your trip and plan are over.

    🏁 The Short Version

    Check your Galaxy has an EID and is unlocked, then go to Settings → Connections → SIM manager → Add eSIM → Scan QR code at home on Wi-Fi. After landing, switch the line on, turn on Data roaming and set the eSIM as your mobile data SIM. That's it.

    Choose your plan from all AirCarta destinations, or start with our popular Japan eSIM plans and install it on your Samsung tonight.

    Browse eSIM plans for 190+ countries